SUN SHINE FELOX - STAINLESS WELDING CLEANING GEL

Why apply Sun Shine Felox against rust and corrosion after welding on stainless metal?

Stainless steel surfaces are covered with a protective layer for protection. Surface treatments such as welding heat treatment remove this layer from the surface. This layer, which protects against rust, must be renewed in a short time. For this reason, chemical cleaning should be done for surface contamination caused by welding stains or other processes. After cleaning with Sun Shıne Felox gel welding stain cleaning cream, this protective layer is formed again. Sun Shıne Flox Stainless welding gel rebuilds this layer. The product used for cleaning welds in stainless steel metal processing companies is an original Turkish product.

How much area can you clean with Sun Shine Felox?

Sun Shine Felox Welding Stain Cleaning Gel weighing 2 Kg cleans 400 square meters of stainless steel welding trace surface.

METHOD OF USE:

Shake Sun Shine Felox Welding Stain Cleaning Gel briefly to homogenize. Apply the Stainless Welding and Surface Cleaning Gel to the stained area with the help of a brush. Leave for 15 - 60 minutes for the Stainless Welding stain cleaning reaction to take place. Wipe the surface. Clean with plenty of pressurized water.

With Sun Shine Felox stainless cleaner, less reaction time provides cleaning in a shorter time. Stainless cleaner provides stronger etching Stainless welding cleaning gel provides later drying time. Stainless cleaner provides better washability with water. With Sun Shine Felox stainless welding cleaning gel, a homogeneous color is obtained without yellowing.

Warning :

* Do not apply on hot surfaces.

* Keep the product away from your skin as it is acid based.

* In case the product comes into contact with the skin during the cleaning of argon welded surfaces, wash with plenty of water.